Guadalajara, September 29 – October 1 – 26.09.2026 Secop and Official Distributor Imcosa at AHR Expo Guadalajara, Mexico 2026, Booth 1404

Secop at AHR Expo Guadalajara 2026

New KLE8.6GFHX and NLVE-CN Core Functions Controllers on Display

Secop exhibits at AHR Expo Mexico 2026 in Guadalajara from September 29 to October 1, at booth 1404, together with Imcosa, its official distributor in Mexico. The company presents the KLE8.6GFHX, which extends the KL series for light commercial refrigeration, and the NLVE-CN variable-speed compressors with the new Core Functions controller for 115 V / 60 Hz applications.

AHR Expo Mexico is the largest HVACR marketplace in Latin America. For OEMs, contractors and service professionals in the region, the booth brings together the current Secop range for light commercial refrigeration and the local availability, technical consultancy and after-sales service provided by Imcosa.

Event

  • Who: Secop GmbH and Imcosa, its Mexican distributor
  • What: KLE8.6GFHX and NLVE-CN Core Functions controllers, alongside the KLF propane range and BD Nano DC compressors
  • When: September 29 to October 1, 2026
  • Where: Expo Guadalajara, Jalisco, Mexico
  • Booth: 1404

KLE Series: 4.0 to 8.6 cm³ Displacement

The KLE-GFMX/GFHX/CFHX compressors derive from the Secop K-Series, with more than 50 million units installed. The addition of the KLE8.6 completes a platform of six capacities, covering entry-level equipment up to higher-capacity units with a single family.

  • Displacement: 4.0 to 8.6 cm³, six capacities on one platform
  • Refrigerants: R134a and R513A, with refrigerant-specific configurations
  • Operating range: LBP, MBP and HBP cycles, hot gas defrost supported across the series
  • Voltage: wide voltage range, with extra protection against voltage drops
  • Installation: start equipment available pre-mounted from the factory
  • Origin: made in Europe

Applications: bottle coolers, coolers, glass-door merchandisers, ice cream freezers, wine cellars. Also used as a universal replacement in commercial refrigerators, display cases and ice machines.

NLV-CN: One Controller for Every Need

The electronic control solution for R290 (propane) variable-speed compressors is available in three versions: Core Functions (CF), Multipurpose (MP) and Extended (XT). The range covers 8 to 15 cm³ displacement, with LBP capacity up to 4,323 BTU/h and MBP capacity up to 6,672 BTU/h.

  • Energy consumption: Adaptive Energy Optimization (AEO) matches compressor speed to actual cooling demand, for up to 40% energy savings compared to a fixed-speed R404A compressor
  • Sound level: variable fan speed control reduces noise in commercial environments
  • Compliance: UL listed and GFCI certified for North American markets
  • Refrigerant: R290 (propane), GWP of 3, aligned with F-Gas regulations
  • System control: temperature, compressor speed and connected components managed from a single controller

Applications: glass door merchandisers, stainless steel refrigerators, supermarket freezers.

Also at the Booth

  • KLF (R290, fixed-speed): 4 to 8.6 cm³, 779 to 3333 BTU/h, EER up to 7.20 for display cases, refrigerators, dispensers and HoReCa equipment
  • BD Nano (12-24 V DC, variable-speed): 1.4 and 2.6 cm³, LBP up to 69 W, MBP up to 131 W, for passenger car refrigeration, RV refrigerators, portable cooling boxes and marine appliances

About Secop

Secop is the expert for advanced hermetic compressor technologies and cooling solutions in commercial, mobile and medical refrigeration. Headquartered in Flensburg, Germany, the company builds on more than 70 years of industrial heritage. The portfolio covers AC fixed-speed and variable-speed compressors, DC variable-speed compressors, condensing units, and biomedical and ULT freezer solutions, with a focus on natural refrigerants and energy efficiency.

About Imcosa

Importaciones Cortés, S.A. de C.V. (Imcosa) is Secop's official distributor in Mexico and Latin America and the main aftermarket distributor in the country. The partnership between the two companies passed the ten-year mark in 2025. Imcosa provides product availability, technical consultancy, sales and after-sales service across the region.

We use cookies to personalize content and ads, to provide social media features and to analyze our traffic. We also share information about your use of our site with our social media, advertising and analytics partners. Click "Manage preferences" if you would like to read more about our cookies and adjust your preferences. By clicking "Accept all", you agree to the use of all cookies as described in our Privacy Policy. Privacy Policy